omnisecu.com free mcse ccna rhce linux java learning  
Home Knowldege Base FAQ Contact Us Sitemap
Knowledge base
omnisecu.com free mcse ccna rhce linux java learning
Home » Knowledge Base
 

Networking and Network Security Knowledgebase

 

Knowledgebase

I - Basic Networking

Lesson 01 - Introduction

Lesson 02 - Why we need computer networks?

Lesson 03 - Network Topologies - Bus Topology

Lesson 04 - Network Topologies - Star Topology

Lesson 05 - Network Topologies - Mesh, Ring and Hybrid Topologies

Lesson 06 - Network Infrastructure Devices- What is a hub?

Lesson 07 - Network Infrastructure Devices - What are Bridges and Switchs?

Lesson 08 - Network Infrastructure Devices - What is a Router?

Lesson 09 - Common Network Cable types

Lesson 10 - Straight-Through and Cross-Over cables

Lesson 11 - Difference between Baseband and Broadband

Lesson 12 - Network Access Methods - CSMA/CD, CSMA/CA and Token Passing

Lesson 13 - LAN Technologies - Ethernet

Lesson 14 - Ethernet Media Standards

Lesson 15 - Lan Technologies - Token Ring

Lesson 16 - Lan Technologies - Fibre Distributed Data Interface (FDDI)

Lesson 17 - IEEE 802 Standards

 

II - TCP/IP

Lesson 01. TCP/IP Introduction.

Lesson 02 - Seven Layers of OSI Model.

Lesson 03 - Comparison between TCP/IP and OSI.

Lesson 04. TCP/IP Encapsulation and Decapsulation.

Lesson 05. TCP/IP Network Access Layer.

Lesson 06. TCP/IP Internet Layer

Lesson 07. IP Addresses

Lesson 08 - Class C Subnetting Tutorial - Part 1

Lesson 09 - Class C Subnetting Tutorial - Part 2

Lesson 10 - Class B Subnetting Tutorial - Part 1

Lesson 11 - Class B Subnetting Tutorial - Part 2

Lesson 12 - Class A Subnetting Tutorial - Part 1

Lesson 13 - Class A Subnetting Tutorial - Part 2

Lesson 14 - Variable Length Subnet Masking (VLSM)

Lesson 15 - Supernetting

Lesson 16 - Address Resolution Protocol (ARP)

Lesson 17 - Internet Control Message Protocol (ICMP)

Lesson 18 - TCP/IP Transport Layer

Lesson 19 - Transmission Control Protocol (TCP)

Lesson 20. Transmission Control Protocol (TCP) Segment Header

Lesson 21 - TCP Three-way Handshake

Lesson 22 - Multiplexing and Demultiplexing using port numbers

Lesson 23 - Transmission Control Block (TCB)

Lesson 24 - TCP Sliding Window

Lesson 25 - TCP Connection Termination

Lesson 26 - User Datagram Protocol (UDP)

Lesson 27 - Differences between TCP and UDP

Lesson 28 - TCP/IP Application Layer

Lesson 29 - Hypertext Transfer Protocol - What is HTTP?

Lesson 30 - Hypertext Transfer Protocol (HTTP) - Request and Response

Lesson 31 - Simple Mail Transport Protocol (SMTP) - How SMTP Works?

Lesson 32 - Simple Mail Transport Protocol (SMTP) Client - Server Communication

Lesson 33 - SMTP Status Codes and Extended Simple Mail Transfer Protocol (ESMTP)

Lesson 34 - Dynamic Host Configuration Protocol (DHCP) - How DHCP works?

Lesson 35 - Dynamic Host Configuration Protocol (DHCP) - Message Format.

 

III - Cisco Certified Network Associate (CCNA)

Lesson 01 - Introduction to Cisco Certified Network Associate (CCNA) Certification

Lesson 02 - Different Types of Router Memory

Lesson 03 - Cisco Router Boot Sequence

Lesson 04 - How to communicate with a Router using Console, Auxiliary, Telnet, SSH, HTTP and HTTPS connections

Lesson 05 - Cisco's Three-tier Hierarchical Network Model

Lesson 06 - Benefits of Segmenting a network using a Router

Lesson 07 - What are Collision Domain and Broadcast Domain

Lesson 08 - Cisco IOS Command Line modes

Lesson 09 - How to configure passwords to secure Cisco Router

Lesson 10 - Basic Cisco Router Configuration Commands

Lesson 11 - Cisco Router Show Commands

Lesson 12 - Important Key Combinations of Cisco IOS Command Line Interface (CLI)

Lesson 13 - How to configure Router Serial Interfaces

Lesson 14 - Types of Routes - Static Routes and Dynamic Routes

Lesson 15 - What is the difference between Routing Protocols and Routed Protocols

Lesson 16 - What is Autonomous System and Autonomous System Number

Lesson 17 - What is Administrative Distance

Lesson 18 - How to configure Static Routes and Default Routes

Lesson 19 - What is Dynamic Routing and different types of Dynamic Routing

Lesson 20 - Introduction to Distance Vector Routing Protocols

Lesson 21 - How to configure Routing Information Protocol (RIP)

Lesson 22 - How to configure Interior Gateway Routing Protocol (IGRP)

Lesson 23 - What is Routing Metric Value

Lesson 24 - What is Routing Loop and how to avoid Routing Loop

Lesson 25 - Introduction to Link State Routing Protocols

Lesson 26 - How to configure Open Shortest Path First (OSPF)

Lesson 27 - Introduction to Hybrid Routing Protocols

Lesson 28 - How to configure Enhanced Interior Gateway Routing Protocol (EIGRP)

Lesson 29 - Access Control Lists - ACL

 

IV - Security

Part 01 - Basics of Information Security

Lesson 01 - Introduction to Information Security

Lesson 02 - Authentication

Lesson 03 - Kerberos Authentication

Lesson 04 - Challenge Handshake Authentication Protocol (CHAP) Authentication

Lesson 05 - Biometric Authentication

Lesson 06 - Token Authentication

Lesson 07 - Multi-Factor Authentication

Lesson 08 - Access Control

Lesson 09 - Discretionary Access Control (DAC)

Lesson 10 - Mandatory Access Control (MAC)

Lesson 11 - Role-based Access Control (RBAC)

 

Part 02 - Internet Protocol Security (IPSec)

Lesson 1 - Internet Protocol Security (IPSec) - What is IPSec?

Lesson 2 - Internet Protocol Security (IPSec) - Security Association (SA)

Lesson 3 - Internet Protocol Security (IPSec) - Security Parameter Index (SPI)

Lesson 4 - Internet Protocol Security (IPSec) - Transport Mode

Lesson 5 - Internet Protocol Security (IPSec) - Tunnel Mode

Lesson 6 - Internet Protocol Security (IPSec) - Authentication Header (AH)

Lesson 7 - Internet Protocol Security (IPSec) - Encapsulating Security Payload (ESP)

Lesson 08 - What are Windows 2003 IPSec features?

Lesson 09 - What are IPSec policies?

Lesson 10 - How to configure IPSec in a Windws 2003 network to secure Telnet traffic?

Lesson 11 - How to create an IPSec policy in a Windows 2003 server?

Lesson 12 - How to create an IPSec Rule in Windows 2003 server?

Lesson 13 - How to create an IPSec IP filter list in Windows 2003 server?

Lesson 14 - How to associate IPSec filter list to filter action?

Lesson 15 - How to assign IPSec policy in Windows 2003 server?

Lesson 16 - How to configure IPSec Integrity and Encryption algorithms in windows 2003?

 

Part 03 - Public Key Infrastructure

Lesson 01 - What is Symmetric Encryption?

Lesson 02 - Symmetric Encryption Algorithms

Lesson 03 - What is Asymmetric Encyption?

Lesson 04 - Asymmetric Encryption Algorithms

Lesson 05 - Public Key Cryptography

Lesson 06 - What is a Digital Certificate?

Lesson 07 - What is Public Key Infrastructure (PKI)?

Lesson 08 - What is a Certificate Authority (CA)?

Lesson 09 - Comparison between Internal and External Certificate Authorities (CAs)

Lesson 10. Certificate Authority (CA) Hierarchy

Lesson 11. Windows 2003 Certificate Authorities (CAs)

Lesson 12 - Windows 2003 Certificate Server Architecture

Lesson 13 - Stand-alone Root Certificate Authority (CA)

Lesson 14 - Installing Stand-alone Root Certificate Authority (CA)

Lesson 15 - Installing Enterprise Subordinate Certificate Authority

Lesson 16 - How to submit Certificate Request to a Root Certificate Authority (CA)

Lesson 17 - How to import Root CA Certificate inside Trusted Root Certification Authorities Store

Lesson 18 - How to install CA certificate issued from Root CA on Enterprise Subordinate CA

 

V - Windows 2003

Part 01 - Disk Management

Lesson 01 - Difference between Basic and Dynamic disks

Lesson 02 - How to create a Primary Partition

Lesson 03 - How to create an Extended Partiton

Lesson 04 - How to create a Logical Drive

Lesson 05 - How to convert basic disk to dynamic disk

Lesson 06 - Dynamic Volumes- Simple Volume

Lesson 07 - How to create a Simple Volume

Lesson 08 - Dynamic Volumes - Spanned Volume

Lesson 09 - How to create a Spanned Volume

Lesson 10 - Dynamic Volumes - Striped Volume

Lesson 11 - How to create a Striped Volume

Lesson 12 - Dynamic Volumes - Mirrored Volume

Lesson 13 - How to create a Mirrored Volume

Lesson 14 - Dynamic Volumes - Striping with parity (RAID-5) Volume

Lesson 15 - How to create a triping with parity (RAID-5) Volume

Lesson 16 - New Technology File System (NTFS)

Lesson 17 - New Technology File System (NTFS) Attributes

Part 02 - Managing Files and Folders

Lesson 01 - New Technology File System (NTFS)

Lesson 02 - New Technology File System (NTFS) Attributes

Lesson 03 - NTFS Permissions

Lesson 04 - Standard Permissions

Lesson 05 - Special Permissions

Lesson 06 - Relation between Standard Permissions and Special Permissions

Lesson 07 - Permission Changes While Moving or Copying an NTFS File

Lesson 08 - How to take the Ownership of a file

Lesson 09 - Introduction to Folder Sharing

Lesson 10 - How to share a folder using Windows Explorer

Lesson 11 - How to share a folder on a remote computer using Shared Folders snap-in

Lesson 12 - Share Permissions

Lesson 13 - Introduction to Offline Files and Folders

Lesson 14 - How to enable Offline Files

Lesson 15 - How to make files available Offline

 

Part 03 - Active Directory

Lesson 01 - What is Directory Service?

Lesson 02 - Introduction to Directory Standards

Lesson 03 - What is Active Directory (AD)?

Lesson 04 - What is Active Directory (AD) Forest?

Lesson 05 - What is Active Directory (AD) Tree?

Lesson 06 - What is Active Directory (AD) Domain?

Lesson 07 - What is a Domain Controller (DC)?

Lesson 08 - What is Organizational Unit (OU)?

Lesson 09 - Active Directory Trusts and Trust Types.

Lesson 10 - What is Active Directory Schema?

Lesson 11 - Windows 2003 Active Directory Installation - How to configure static IP address.

Lesson 12 - Windows 2003 Active Directory Installation - How to install DNS

Lesson 13 - Windows 2003 Active Directory Installation - Running Dcpromo

Lesson 14 - How add a computer to an Active Directory Domain?

Lesson 15 - Active Directory files and their functions

Lesson 16 - What is Active Directory Naming Context or Directory Partition?

Lesson 17 - What is Active Directory Replication?

Lesson 18 - Introduction to Active Directory Sites

Lesson 19 - How to create an Active Directory site

Lesson 20 - How to move Domain Controllers between Active Directory Sites

Lesson 21 - How to create and configure subnets for Active Directory Sites

Lesson 22 - What is Active Directory Site Link?

Lesson 23 - How to create Active Directory Site Link

Lesson 24 - How to configure Site Link attributes

Lesson 25 - What is bridgehead server , preferred bridgehead server and Knowledge Consistency Checker (KCC)

Lesson 26 - What is Site Link Bridge and How to create Site Link Bridge

Lesson 27 - What is Active Directory Global Catalog?

Lesson 28 - How to configure a Domain Controller as Global Catalog Server

Lesson 29 - What is Universal Group Membership caching

Lesson 30 - How to configure Universal Group Membership caching

Lesson 31 - Operations Master Roles (Flexible Single Master Operations - FSMO)

Lesson 32 - How to transfer Operations Master roles (FSMO) to another Domain Controller

Lesson 33 - How to seize Operations Master (FSMO) roles using ntdsutil tool

 

Part 04- User and Group Administration

Lesson 01 - Introduction to Windows 2003 User accounts

Lesson 02 - Windows 2003 Local User Accounts

Lesson 03 - Windows 2003 Built-in User Accounts

Lesson 04 - Windows 2003 Active Directory Domain User Accounts

Lesson 05 - Windows 2003 Logon Names

Lesson 06 - UPN (User Principal Name) Suffixes

Lesson 07 - How to create an Active Directory Domain user account

Lesson 08 - Modifying and administering Active Directory Domain User Accounts

Lesson 09 - How to reset Active Directory domain user password

Lesson 10 - How to unlock an Active Directory Domain User Account

Lesson 11 - How to rename an Active Directory Domain user account

Lesson 12 - How to delete an Active Directory Domain user account

Lesson 13 - How to copy an Active Directory Domain user account

Lesson 14 - How to enable/disable Active Directory Domain User Account

Lesson 15 - Active Directory Domain User Password Policy

Lesson 16 - Active Directory Domain User Account Lockout Policy

Lesson 17 - Introduction to Windows 2003 Groups

Lesson 18 - What is the difference between Security Group and Distribution Group

Lesson 19 - Group Scope - Domain Local, Global and Universal Group Scopes

Lesson 20 - How to create an Active Directory Group

Lesson 21 - How to add an Active Directory User to a Group

 

Part 05 - Windows 2003 Clustering Technologies

Lesson 01 - Introduction to Windows 2003 Clustering

Lesson 02 - Introduction to Network Load Balancing (NLB)

Lesson 03 - Network Load Balancing (NLB) - Unicast and Multicast modes

Lesson 04 - Network Load Balancing (NLB) cluster models

Lesson 05 - Network Load Balancing Manager (nlbmgr.exe)

Lesson 06 - How to create Network Load Balancing (NLB) cluster using nlbmgr.exe

Lesson 07 - Network Load Balancing Client Affinity and Port Configurations

Lesson 08 - How to add a node to Windows 2003 Network Load Balancing Cluster

Lesson 09 - Introduction to Windows 2003 Failover Server Clustering

Lesson 10 - Important definitions related with Server Failover Clustering

Lesson 11 - What is failover and failback

Lesson 12 - Server Cluster Resources and Resource Groups

Lesson 13 - Different types of Failover Server Clusters - Single-Quorum Cluster, Single Local Quorum and Majority Node Set (MNS)

Lesson 14 - Failover Server Cluster Modes - Active/Passive and Active/Active

Lesson 15 - Failover Server Cluster Pre-installation check-lists

Lesson 16 - How to install a Failover Server Cluster

Lesson 17 - How to add a node to a Failover Server Cluster

Part 06 - Windows 2003 Group Policy

Lesson 01: Introduction to Windows 2003 Group Policy

Lesson 02: Local Group policy

Lesson 03: Non-Local Group Policy

Lesson 04: Group Policy Processing Order

Lesson 05: Group Policy Object Editor

Lesson 06 Group Policy Settings

Lesson 07: Group Policy Inheritance

Lesson 08: Group Policy Loop Back Processing

Lesson 09: Group Policy Update Using gpupdate tool

Lesson 10: Local User Profiles

Lesson 11: Roaming Profiles and Mandatory Profiles

Lesson 12 - User Profile Folder Redirection

Lesson 13 - The Resultant Set of Policy (RSoP)

Lesson 14 - Configuring logon/logoff and startup/shutdown scripts

Lesson 15 - Deploying Software with Group Policy

Lesson 16 - Software Restriction policies

 

VI - GNU/Linux

Part 1 - RedHat Certified Engineer (RHCE)

Lesson 01 - UNIX History

Lesson 02 - GNU/Linux Introduction

Lesson 03 - GNU/Linux Concepts

Lesson 04 - Difference between Fedora and RedHat Enterprise Linux

Lesson 05 - Major GNU/Linux Distributions

Lesson 06 - GNU/Linux Kernel and Shell

Lesson 07 - GNU/Linux File System

Lesson 08 - What is inode number?

Lesson 09 - GNU/Linux File System Hierarchy

Lesson 10 - GRUB (GNU GRand Unified Boot loader)

Lesson 11 - Working with grub.conf configuration file

Lesson 12 - How to password protect GRUB (GNU GRand Unified Boot loader)

Lesson 13 - Linux Rescue Mode (Linux Rescue Environment)

Lesson 14 - init process and Linux runlevels

Lesson 15 - inittab configuration file

Lesson 16 - Working with inittab configuration file

Lesson 17 - inittab format

Lesson 18 - Creating and editing text files using vi editor

Lesson 19 - Linux File System Management Tools - fdisk command

Lesson 20 - Linux File System Management Tools - mkfs, mkfs.ext2, mkfs.ext3 commands

Lesson 21 - What is file system journaling?

Lesson 22 - Linux File System Management Tools - fsck command

Lesson 23 - Introduction to Linux /etc/fstab file

Lesson 24 - Linux mount and umount commands

Lesson 25 - Linux mount options

Lesson 26 - Introduction to Bourne Again Shell (BASH)

Lesson 27 - Basic Linux commands

Lesson 28 - Introduction to Logical Volume Manager (LVM)

Lesson 29 - How to create and manage Logical Volume Manager (LVM)

Lesson 30 - Introduction to Redundant Array of inexpensive (or Independent) Disks (RAID)

Lesson 31 - How to create and manage Redundant Array of Inexpensive Disks (RAID)

Lesson 32 - Introduction to swap space

Lesson 33 - How to create and manage swap space

Lesson 34 - Introduction to Linux user administration

Lesson 35 - How to add a user in Linux using useradd command

Lesson 36 - How to use passwd command to manage user passwords

Lesson 37 - How to modify a Linux user using usermod command

Lesson 38 - How to set Linux password aging using chage command

Lesson 39 - How to remove user from Linux using userdel command

Lesson 40 - The Linux user database (/etc/passwd)

Lesson 41 - The Linux password database (/etc/shadow)

Lesson 42 - Introduction to Linux User Group

Lesson 43 - How to create a new group in Linux using groupadd command

Lesson 44 - Linux Group Database (/etc/group) file

Lesson 45 - How to manage Linux user group

Lesson 46 - The Linux File Permissions

Lesson 47 - How to use chmod command to change Linux file permissions

Lesson 48 - How to use chgrp command to change Linux group ownership of a file

Lesson 49 - How to use chown command to change linux user ownership of a file

Lesson 50 - Linux setuid and setgid

Lesson 51 - What is Linux umask?

Lesson 52 - What is Security-enhanced Linux (SELinux), Discretionary Access Control (DAC), Mandatory Access Control (MAC) and Role-based Access Control (RBAC)?

Lesson 53 - Security-enhanced Linux (SELinux) Security Contexts

Lesson 54 - How Security-enhanced Linux (SELinux) works

Lesson 55 - Security-enhanced Linux (SELinux) configuration-file (/etc/selinux/conf)

Lesson 56 - Security-enhanced Linux (SELinux) - Filesystem Relabeling

Lesson 57 - Important Security-enhanced Linux (SELinux) commands

Lesson 58 - Introduction to Linux Disk Quota

Lesson 59 - How to create Linux disk quota database files (aquota.group and aquota.user) using quotacheck command

Lesson 60 - How to turn on and turn off Linux disk quota using quotaon and quotaoff commands

Lesson 61 - How to manage Linux disk quota using edquota and repquota commands

Lesson 62 - Introduction to scheduling tasks using Linux cron daemon

Lesson 63 - How to schedule a task using Linux crontab (/etc/crontab) file

Lesson 64 - How to schedule tasks using Linux at command

Lesson 65 - Linux File filter commands sort wc and grep

Lesson 66 - How to compress, uncompress and view files using Linux commands gzip, gunzip and zcat

Lesson 67 - How to compress uncompress view files using Linux commands bzip2 bunzip2 and bzcat

Lesson 68 - How to use Linux tar (tape archive) command to create archives

Lesson 69 - Introduction to RedHat Package Manager (RPM)

Lesson 70 - Introduction to YUM (Yellow dog Updater, Modified) Package Manager

Lesson 71 - Common Linux network tools - ping, telnet, netstat and arp

Lesson 72 - Linux xinetd Super Server daemon

Lesson 73 - Linux Network Interface Configuration tool - ifconfig

Lesson 74 - Important Linux network configuration files

Lesson 75 - How to configure Dynamic Host Configuration (DHCP) Protocol in Linux

Lesson 76 - Introduction to Domain Name System (DNS)

Lesson 77 - Linux Domain Name System (DNS) client configuration files /etc/hosts, /etc/nsswitch.conf and /etc/resolv.conf

Lesson 78 - Berkeley Internet Name Domain (BIND) as a DNS server

Lesson 79 - How to configure caching-only name server

Lesson 80 - BIND configuration file (/etc/named.conf)

Lesson 81 - Domain Name System (DNS) zone files

Lesson 82 - RNDC (Remote Name Daemon Control)

Lesson 83 - Introduction to Secure Shell and OpenSSH

Lesson 84 - Important OpenSSH client tools - scp, sftp, ssh, ssh-keygen, ssh-copy-id, slogin

Lesson 85 - OpenSSH Configuration Files

Lesson 86 - How to mount a remote File System using Network File System (NFS)

Lesson 87 - How to configure Very Secure File Transfer Protocol Daemon (vsFTPd)

Lesson 88 - Introduction to Network Time Protocol (NTP)

 

 

 
Disclaimer | Feed Back | Trademarks | Knowledge Base | FAQ | Sitemap | Downloads